IPB

Welcome Guest ( Log In | Register )

> Dell rhymes with hell!!
Panzer
post 08/16/03 1:27am
Post #1


Corporal
**

Group: Forum Member
Posts: 30
Joined: April 15th 2003
From: Two feet from my monitor
Member No.: 326



Just wanted to say sorry about the =COM= match. On a lighter note I got back from vacation yesterday to have my cable connection out until today. But before it went back up, I had the bright idea to install the intake fan on my computer. When it was all said & done, I restarted only to get a message saying my boot device can not be found. So, I am now on my other computer typing this. If you guys don't see me for a while that is why; on the other hand if you do see me, take it easy on me..this computer is so old it was actually used for dial up @ one time biggrin.gif

I am waiting for a new hard drive from dell in the meantime, so hopefully talk to you guys later. Also, if anyone knows of any way I might be able to recover some of data I would appreciate any help.

Also, kipp your still gay & no one enjoys any of your B.S. so maybe you should take your lame crap to a forum down to your intelligence level. Maybe Bah, =7=, or {BOM}

This post has been edited by Panzer: 08/16/03 1:57am


--------------------
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
 
Reply to this topicStart new topic
Replies
Wassy
post 08/17/03 8:29pm
Post #2


First Lieutenant
******

Group: Forum Member
Posts: 183
Joined: June 7th 2003
From: Toronto, Canada
Member No.: 387



QUOTE (Panzer @ Aug 17 2003, 06:36 PM)
QUOTE (=C O M= Bouncer @ Aug 17 2003, 02:46 PM)
Its possible it could be a static problem from the installation of the intake. IE, if you touched something in your computer and were not grounded out or plugged something in and board had electricity on it. Why not unplug the intake and see if it boots. Might want to try this and does work. Unplug the back of your pc and turn of the switch. Take a screwdriver to the back of your pc where the three MALE prongs are and touch two of them together for about three seconds. This will drain the excess electricity from your pc. Then plug it back in and boot. I dont know what kind of HD it is but there is a common problem with pc's these days having thier HD's jumper on single or master. Moving it to cable select is usually the best option if its not already thier. If all else fails then clear cmos. Its a simple process and usually the one that fixes a lot of problems. Good luck!

I unplugges the computer b4 I touched anything, I touched the metal on the case to ground myself out. I immediately tried unplugging the fan and hooking it back up to how it was with no luck. I kept getting a message saying "boot device not found" The jumper was already on cable before I did anything. The HD is a seagate baracuda 80GB.

Judging by the techie comments of most players using this Forum, most of you are probably more knowledgeable than Dell's support staff. Whenever I've called Dell's tech support, the wait times for a representative are long (they used diffent service centers in Canada than the U.S), and they aren't helpful. As Panzer said, they read you information which is posted on the Internet. Of my 7 - 8 hardware problems, the worst was when my hard drive crashed, and everything had to be reinstalled. Total time to get my system up & running required 15 hours of my time.

I'm happy that most folks seem to have had good experiences with Dell. I just think that they've got a lot of room for improvement.

P.S. my problem was with a laptop - I understand the reliability of their desktops is substantially better. My P120 Toshiba laptop was great - even dropped it a few times, and it kept on ticking !


--------------------
user posted image
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Posts in this topic
Panzer   Dell rhymes with hell!!   08/16/03 1:27am
Wassy   Dell sucks. On my previous Dell laptop, I had 7 ...   08/17/03 12:46am
realdeal   I've always had Dells. Reccomended about 14 o...   08/17/03 1:04am
Epacy   My Little Pony can be challenging.   08/17/03 1:18am
realdeal   Typical.   08/17/03 1:37am
Panzer   Nice Epacy! Yeah, I have always had dells as...   08/17/03 12:12pm
realdeal   Ok, but that could happen with any computer. I...   08/17/03 3:38pm
Panzer   Granted, I just dislike the fact that the parts ar...   08/17/03 4:42pm
=C O M= Bouncer   Its possible it could be a static problem from the...   08/17/03 4:46pm
SOKHAR_[H]   dont know about that I have had my home built main...   08/17/03 4:52pm
Panzer   I unplugges the computer b4 I touched anything, ...   08/17/03 6:36pm
SOKHAR_[H]   how is the fan connected to the MB or to the power...   08/17/03 7:58pm
Wassy   I unplugges the computer b4 I touched anything, I...   08/17/03 8:29pm
Wassy   I unplugges the computer b4 I touched anything, I...   08/17/03 8:31pm
Panzer   Only problem is, I would have to pick up a foreign...   08/17/03 9:30pm
=C O M= Bouncer   I thought it was funny when you said they didnt sp...   08/17/03 11:50pm
Panzer   I was trying to be polite..sort of, it sounded l...   08/18/03 12:07am
=C O M= Bouncer   Thats the response everyone gives is that they sou...   08/18/03 12:16am
Kipp Da Pimp   here you go, everyone   08/18/03 1:10am
realdeal   Kipp, keep it on topic please.   08/18/03 10:58am
Panzer   Whoa, kipp you need that more then we do. Use it ...   08/18/03 11:40am
JP   yea just reset the bios, you might have to get int...   08/18/03 5:58pm
Panzer   I could get in through the BIOS and tried running ...   08/19/03 12:57am
All over but the Crying   Ok, but that could happen with any computer. I...   08/19/03 4:32am
realdeal   Email me AOBTC @ realdeal@mobclan.com and we'l...   08/19/03 1:27pm
Panzer   You guys could just bench off of 3dmark03   08/21/03 1:10am
Panzer   Upadate: Received my new hard drive tried to insta...   08/22/03 7:28pm
Johnzillah   Dell builds good stuff but this one seems to be ...   08/22/03 8:53pm
Panzer   Yeha, dells are good if you don't mess with th...   08/22/03 10:27pm
All over but the Crying   I will give dell one bonus; they build very quiet ...   08/23/03 8:12am
JP   3dmark03 is a bad test, run something like a burn ...   08/23/03 11:13pm


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



- Lo-Fi Version Time is now: 05/04/26 11:48pm
Skin Designed by Canucks Fan Zone