Some pictures of the drilling rig I worked on Options

[blk96gt]

Some of you probably knew that I stopped going to school for a year and got a job as a roughneck on an offshore drilling rig. I've had a few people ask me about it, so I figured I would post a few pictures of the rig and a little info on what we did.
This is the rig I worked on. If you're wondering how we got up to the rig we used what's called a personnel basket, which is hooked up to the crane. The crane will raise and lower people from/to the boat and rig. You can see the basket hanging from the crane in this picture with four people on it.

This is a good picture from the crew boat that shows the whole rig and the platform that we were working over.

This is the picture of the drillfloor where I spent pretty much all my time. On the left you can see the break-out tongs, which were used to break the two tool joints loose. The torque on 5" drillpipe(which is what we are using here) is around 6000 pounds. When making a trip(pulling the whole drill pipe string out of the hole), you can throw the tongs well over 150 times in a day. You also pull and set the slips(the thing with three handles behind the drill pipe) every time you make/break a connection. Tripping pipe was my favorite thing to do. You were pretty much none stop for 12 hours.

These are just some various pictures on the rig.

Here is a picture of the derrick from the drillfloor. The derrick hand is the one who goes up to the derrick while tripping pipe and racks back or latches up a stand of pipe(a stand of pipe is around 93 feet, and is made up of three joints, which are around 30-32 feet each).

Various pictures from up in the derrick of the drill floor and the rig, and also a picture of the ladder you have to climb up to get to the derrick.

Here is what's called the monkey board, which is what the man in the derrick stands on when making a connection or racking a stand back. The rope/belt thing is called the belly rope. You put that around your waist so you can lean out and reach the elevators. You can also see the bucket to sit on when the times get slow.

These are the fingers where all the stands of pipe are stored. This is one set, and there's also another set on the other side of me. Around 115 stands of 5" drill pipe can be stored on this set of fingers, and something like 70 or 80 on the other.

One of the nice sunsets we get to see.

I've got more, but don't really feel like posting them now, and ya'll probably don't care to see them anyways, but oh well. Enjoy.

This post has been edited by blk96gt: 03/12/07 7:12pm

[HammaTime]

Wow! Thanks for sharing that with us.

It really brings back some memories for me. I worked as a roughneck after college. My rig was north of Odessa, Texas. Throwing the tongs was the most grueling work I've ever done. It didn't help that we were trying to drill as fast as we could and they were short handed. That meant I'd often work double-shifts which KILLED me!

We constantly were thinking about having to escape in an emergency (the first day I had on the job we had a man go down after a release of Hydrogen Sulfide gas) and yet people were always parking their damn trucks in front of our zip line.

I'm sure safety measures have improved dramatically since those days, but we often wondered how comfortable the off-shore guys felt about their emergency systems.

I'll never forget the feeling of being covered head to toe in that damn acidic drilling mud. That's a memory I prefer to forget! LOL!