 Vent Mic Echo |
| GIJOE |
 11/26/06 1:16am
Post
#1
|
 Major  Group: {MOB} Posts: 521 Joined: August 14th 2006 From: San Fernando Valley, CA Member No.: 1887  |
For those people (like me) who have a creative labs soundblaster (any) make sure in the vent home page, select setup, then make sure under hardware input mixer (optional) line set to microphone and nothing else.
This was a trick I learned after many complaints and allot of trouble. Seems it is a documented problem for all soundblaster cards. This should take care of the echo problem. Get used to using a hot key for the mic, as using an open mic causes feedback and echo, not to mention the annoying breathing...LOL Just make sure you select the push to talk (PTT) and select a hot key for Mic Open.  This post has been edited by GIJOE: 11/26/06 1:20am -------------------- |
   |
 
|
Posts in this topic
  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 05/03/26 6:31pm |
Invision Power Board
© 2026 IPS, Inc.